ProfessionalDistributorMagazine.com |

Arizona Transmission Machine introduced its EZ-DRIVER bearing installation sets. The Master set is highly adaptable, with a series of 28 interchangeable Force Distributors in two styles, to install bearings and other components onto or over a shaft. Create more than 200 different usable setups. EZ-DRIVER offers versatility for working on components from bearings to seals, gears, hubs and sleeves.

Infrared Industries' HM5000 analyzer connects to the vehicle's exhaust; while you drive you'll see exactly how much HC, CO, CO2, O2, and NOx the vehicle is emitting. It also shows air/fuel ratio, grams/mile and Lambda, as well as a Tach ... all the info you need to tune or troubleshoot any RPM. The HM5000 can interface with a PC, PDA or data acquisition system. Run the engine in the real world because the HM5000 features a 1-second response time.

Redline Detection's Lights Out guide for Mercedes-Benz service light reset solutions provides technicians with step-by-step directions to quickly reset the maintenance alert on nearly every Mercedes-Benz model on the market today. The guide covers 1998-2009 in two volumes, each covering six years, and can be purchased individually or as a set.

Bar's Leaks reformulated its Liquid Copper Block Seal, No. 1109, to make it a one-step copper block seal; simply pour it into the radiator, idle the engine for five minutes, cool, top off with coolant and go. Other products require a complete system flush, plus a number of additional steps, with an average six to 10 hour timeline for completion. Customers using other products also have to add new coolant, which adds to the cost of the repair. Liquid Copper can be used in any water-cooled vehicle.

Shark Industries Green Cubitron and Red Ceramic mini grinding discs target stainless steel/nickel alloys and other hard metals and heavy rust. The Green Cubitron provides longer life than aluminum-oxide or zirconia discs, and is available in 36, 50 or 80 grit and 2" and 3" diameters. The Red Ceramic discs are available in 2" and 3", grits 36, 40, 50, 60 and 80, and are cooler running and more load resistant than the Green Cubitron.

VIM Tools' Adjustable Magnetic Tool and Parts Tray, No. MT1, keeps tools and parts organized and portable for increased productivity. The trays hold over 5 lbs. and can be stuck to most shop equipment. When stuck to the underside of the hood or inner fender wells, the tray can be leveled to hold all of the tools and parts needed.

The Ripped Spark Plug Boot Remover, No. 68450, from SP Tools easily removes ripped and stuck-on spark plug boots where there is no access to grab the boot. The tool slides into the confined space of the spark plug hole and, with hand pressure, separates the stuck boot from the porcelain. The tool slides out with the damaged boot, leaving the spark plug exposed and easily removed. The tool was designed specifically for various Ford 4.6L and 5.4L V-8s and 6.8L V-10s, and Chrysler 3.7L V-6s and 5.7L V-8 Hemis.

Streamlight's Stinger LED HP and Stinger DS LED HP rechargeable flashlights provide brightness and versatility with C4 LED technology, three intensity levels and a strobe feature. The Stinger LED HP offers a multi-function, head-mounted pushbutton switch. The Stinger DS LED HP features innovative Dual-Switch technology, providing a second multi-function, pushbutton tactical tail switch for full-feature control, independent of the other switch. Both lights are powered by three-cell, 3.6V nickel-cadmium sub-C batteries rechargeable up to 1,000 times. Both fit existing Stinger chargers.

Alanine's technical mechanic gloves feature double-stitched Amara leather, non-slip silicon grips, extended-wear features, rally stripes and patent-pending small parts pocket.

Z-CALZ Magnetic and Decal Tool Kits help you find your tools fast, with less frustration and shuffling through drawers. Z-CALZ make it easy for others helping you to find your tools fast, too. The Magnetic line is currently offered in black and stainless steel with red or blue pinstripes. The nonmagentic Decal line are for stainless steel, aluminum or plastic toolboxes. Both lines include 70 individual magnets or decals to label your storage areas.